The Influence of the Flexibility of a Polymeric Adhesive Layer on the Mechanical Response of a Composite Reinforced Concrete Slab and a Reinforced Concrete Beam Girder

This study addresses the challenges of modeling flexible connections in composite structures employing a polymeric adhesive layer. These types of connections provide a more uniform stress distribution compared to conventional rigid connectors. However, they lack standardized design rules and still require much research to sufficiently comprehend their properties. The novelty of this research lies in proposing an analytical solution to address these issues. Its aim is to investigate the influence of the stiffness of the polymer adhesive on the girder’s deflection and on the maximum stresses in both the adhesive and concrete. The analyzed composite structure consists of a reinforced concrete (RC) slab and an RC beam connected with a layer of flexible polyurethane (FPU) adhesive. Analytical and numerical approaches for the description of the mechanical response of a composite bridge girder are presented. Another objective is to validate the analytical design formulas using 3D nonlinear numerical analysis, both in the case of uncracked and cracked concrete. Seven types of FPUs are tested in the uniaxial tension test, each examined at five strain rates. The obtained data is used to predict the mechanical response of the considered girder using finite element analysis (FEA) as well as with a simplified one-dimensional composite beam theory. Fair agreement is found between the FEA results and theoretical predictions. A comparison of the results obtained for these two models is performed, and the similarities and discrepancies are highlighted and discussed.